How to make the right choice of solar road markers

How to make the right choice of solar road markars

 

About Solar Road Markers/ Solar Road Studs-SOLAR DOCK LIGHTS -SOLAR ROAD MARKERS -Solar Road Studs in Using -Solar dock light real picture: Solar Road Markers (also called Solar Dock Light, Solar Road Reflector, Solar Road Delineators, Solar Pathway light, Solar Road Stud, Solar Cat Eye) products have several advantages over conventional reflective markers because of their built-in, self sustaining L.E.D.s.
Advantages of solar road markers products include but not limited to the following:
1. Provide great visibility for drivers at night and during bad weather conditions.
2. Prevent fatal accidents and serious injuries caused by hidden and hard-to-see center lines.
3. Maximize the drivers ability to operate and maneuver through dark spots, or dangerous sharp-curved areas on the road, alone the dock, in your gardens.
4. Cost effective, easy to install and virtually no maintenance.
5. Use of natural solar energy is good for environmental conservation.

Main PROBLEMS for solar road markers all over the world:

1. NO anti-pressure, Can not stand Vehicles’ come over. (First, Usually because the solar markers are empty inside. Solar road markers must be solid inside. Second, onroad solar marker of course no anti-pressure. Till now, there is no onroad solar markers could be as good anti-pressure as used in the heavy traffic areas and central lines )
2. Using life too short. (Ni-Cd battery’s life is only half year. Ni-Mh battery’s life is only 3 years. But if use LI-on battery, using life could up to 8-10 years. (this is enough for most usage) If Capacitor, could over 10 years.)

One important question: How to make the choice of these 2 types of solar road markers:
1. SOLAR EMBEDDED MARKERS – Because only several MM above the road surface, which make it much more anti-pressure. And it’s also snow-plough- able, which is top necessary in a high latitude area. solar embedded markers could used nearly all road situations.
2. SOLAR ON-ROAD MARKERS – Because on-road design, could not be used in center line, only on side lines or on lane stones. And could not be used for heavy traffic areas. Garden areas could be a choice.

Applications for these 2 types of road markers:
Applications:Central line, Border Line, Lane Rock, Pedestrian Area, School Zone, Traffic island, Garden, Dock, Deck, Amusement or Other Parks, Airports, Rotary, Parking Lots, Industrial Space
Embedded Markers All OK
On-road Markers NO for cnetral line , pedestrian area, and airport

WHY BENEDRIVE’s DESIGN IS YOUR BETTER CHOICE?
1. Over-mobile, even for snow plough, only 3mm over the road surface.
2. Products Depth: 26mm,Installation is much easier and cost much less. And Could be used for all types of Highways and country road. (Other designs’ depth is about 100mm, could not used for some highways and country road which depth is very limited. Less than 60mm. )
3. Solid inside, much more durable than others, which are empty inside.
4. Unit cost much lower than other embedded markers.

Other Special Designs of BENEDRIVE’s: Solar road studs picture 1
1. Special installation part, stop the marker sink into the installation hole, and also easy to broken and take away by the vehicles’ wheels but no hurt the wheels at all.
2. Blges stop the markers’ revolving.
3. Special dust proof design